diff --git a/keyboards/0xcb/1337/1337.c b/keyboards/0xcb/1337/1337.c
index 142c24639a..85781209b3 100644
--- a/keyboards/0xcb/1337/1337.c
+++ b/keyboards/0xcb/1337/1337.c
@@ -20,13 +20,6 @@ void eeconfig_init_kb(void) {
#ifdef BACKLIGHT_ENABLE
backlight_enable();
backlight_level(5);
-#endif
-#ifdef RGBLIGHT_ENABLE
- rgblight_enable();
- rgblight_sethsv(0, 255, 255);
-#ifdef RGBLIGHT_ANIMATIONS
- rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL + 2);
-#endif
#endif
eeconfig_update_kb(0);
diff --git a/keyboards/0xcb/1337/1337.h b/keyboards/0xcb/1337/1337.h
index 7de5365d8b..e1f238c126 100644
--- a/keyboards/0xcb/1337/1337.h
+++ b/keyboards/0xcb/1337/1337.h
@@ -26,6 +26,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
* The second converts the arguments into a two-dimensional array which
* represents the switch matrix.
*/
+// clang-format off
#define LAYOUT( \
KA1, KA2, KA3, \
KB1, KB2, KB3, \
@@ -36,3 +37,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
{ KB1, KB2, KB3 }, \
{ KC1, KC2, KC3 } \
}
+// clang-format on
diff --git a/keyboards/0xcb/1337/config.h b/keyboards/0xcb/1337/config.h
index 6d25e49cc9..21332c5585 100644
--- a/keyboards/0xcb/1337/config.h
+++ b/keyboards/0xcb/1337/config.h
@@ -17,6 +17,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
#include "config_common.h"
+// clang-format off
/* USB Device descriptor parameter */
#define VENDOR_ID 0xCB00
@@ -47,19 +48,26 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGB_DI_PIN D3
#ifdef RGB_DI_PIN
- #define RGBLED_NUM 5
+ #define RGBLED_NUM 4
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
- // #define RGBLIGHT_ANIMATIONS
- #define RGBLIGHT_EFFECT_BREATHING
- #define RGBLIGHT_EFFECT_SNAKE
- #define RGBLIGHT_EFFECT_STATIC_GRADIENT
- #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
- #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+ #define RGBLIGHT_ANIMATIONS /* comment this and uncomment the lines below to save space */
+ // #define RGBLIGHT_EFFECT_BREATHING
+ // #define RGBLIGHT_EFFECT_SNAKE
+ // #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+ // #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+ // #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+ /* default setup after eeprom reset */
+ #define RGBLIGHT_DEFAULT_MODE RGBLIGHT_EFFECT_BREATHING + 2
+ #define RGBLIGHT_DEFAULT_HUE 152
+ #define RGBLIGHT_DEFAULT_SAT 232
+ #define RGBLIGHT_DEFAULT_VAR 255
+ #define RGBLIGHT_DEFAULT_SPD 2
#endif
+// clang-format on
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
diff --git a/keyboards/0xcb/1337/gfxfont.c b/keyboards/0xcb/1337/gfxfont.c
index 4e7940b64a..b78e359c78 100644
--- a/keyboards/0xcb/1337/gfxfont.c
+++ b/keyboards/0xcb/1337/gfxfont.c
@@ -15,7 +15,7 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "progmem.h"
-
+// clang-format off
static const unsigned char font[] PROGMEM = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00,
@@ -274,3 +274,4 @@ static const unsigned char font[] PROGMEM = {
0x07, 0x07, 0x0F, 0x0F, 0x1E, 0x3E,
0x3C, 0x7C, 0x70, 0xC0, 0x80, 0x00,
};
+// clang-format on
diff --git a/keyboards/0xcb/1337/keymaps/conor/keymap.c b/keyboards/0xcb/1337/keymaps/conor/keymap.c
new file mode 100644
index 0000000000..e9d8756b11
--- /dev/null
+++ b/keyboards/0xcb/1337/keymaps/conor/keymap.c
@@ -0,0 +1,185 @@
+/*
+Copyright 2021 0xCB - Conor Burns
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+// clang-format off
+enum layer_names {
+ _HOME,
+ _MISC,
+ _RGB,
+ _BLED
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[_HOME] = LAYOUT(
+ KC_MPRV, KC_MNXT, KC_MPLY,
+ KC_PGUP, KC_PGDN, TO(3),
+ KC_HOME, KC_END, TO(1)
+),
+[_MISC] = LAYOUT(
+ _______, _______, _______,
+ _______, _______, TO(0),
+ _______, _______, TO(2)
+),
+[_RGB] = LAYOUT(
+ RGB_HUI, RGB_HUD, RGB_MOD,
+ RGB_SAI, RGB_SAD, TO(1),
+ RGB_SPI, RGB_SPD, TO(3)
+),
+[_BLED] = LAYOUT(
+ BL_STEP, BL_BRTG, BL_TOGG,
+ BL_ON, BL_OFF, TO(2),
+ BL_INC, BL_DEC, TO(0)
+)
+};
+// clang-format on
+
+/* rotary encoder (SW3) - add more else if blocks for more granular layer control */
+#ifdef ENCODER_ENABLE
+bool encoder_update_user(uint8_t index, bool clockwise) {
+ if (IS_LAYER_ON(_RGB)) {
+ #ifdef RGBLIGHT_ENABLE
+ if (clockwise) {
+ rgblight_increase_val();
+ } else {
+ rgblight_decrease_val();
+ }
+ #endif
+ } else if (IS_LAYER_ON(_BLED)) {
+ if (clockwise) {
+ backlight_increase();
+ } else {
+ backlight_decrease();
+ }
+ } else {
+ if (clockwise) {
+ tap_code(KC_VOLU);
+ } else {
+ tap_code(KC_VOLD);
+ }
+ }
+ return true;
+}
+#endif
+
+/* oled stuff :) */
+#ifdef OLED_DRIVER_ENABLE
+uint16_t startup_timer;
+
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+ startup_timer = timer_read();
+ return rotation;
+}
+
+static void render_logo(void) {
+ static const char PROGMEM raw_logo[] = {
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,128, 64,128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,128, 64,128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,128, 0, 0, 0, 0, 0, 0, 1, 2, 4, 2, 1, 1, 1, 1, 1, 1,255, 0, 0, 0, 0, 0, 0, 0, 0, 0,255, 1, 1, 1, 1, 1, 1, 2, 4, 2, 1, 0, 0, 0, 0, 0, 0,128, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2, 5,248, 5, 2, 0, 0, 0, 0, 0, 0,128,192,192,224,224,112,120, 56, 63, 28, 14, 14, 14,254, 14, 14, 30, 28, 63, 56,120,112,224,224,192,128, 0, 0, 0, 0, 0, 0, 0, 2, 5,248, 5, 2, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 64,160, 19,162, 66, 66, 66, 66, 66, 66, 66,255,255,255, 0, 0, 0,252,254,254,192,192,192,192,255, 0, 0, 0, 62, 62, 60, 60, 0, 0, 1,255,255,255, 66, 66, 66, 66, 66, 66, 66,162, 19,160, 64, 0,
+ 0, 0, 0,128, 64, 64, 64,128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,128,192, 64, 64,192,128, 0, 0,192, 64, 64,192,128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,192, 64,192, 0, 0, 0, 0, 0,128,192, 64, 64,192,128, 0, 0,128,192, 64, 64,192,128, 0, 0, 64, 64, 64, 64, 64,192, 0, 0, 0, 0, 0,249, 8, 8, 8, 8, 8, 8, 8, 8,127,255,255,192,128,128, 15, 31, 31, 1, 1, 1, 1,255, 0, 0, 0, 30, 30, 14, 14,128,192,192,255,255,127, 8, 8, 8, 8, 8, 8, 8, 8,249, 0, 0, 0,
+ 0, 0, 31, 49, 64, 78, 64, 49, 31, 0, 0, 97, 22, 8, 22, 97, 0, 0, 31, 49, 96, 64, 64, 96, 32, 0, 0,127, 68, 68,100, 59, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 64, 64,127, 64, 64, 0, 0, 0, 32,100, 68, 68,110, 59, 0, 0, 32,100, 68, 68,110, 59, 0, 0, 0, 0, 0,126, 3, 1, 0, 0, 0, 8, 20, 35, 20, 8, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 3, 7, 7, 15,254, 30, 28, 28, 28,255, 28, 28, 28, 30,254, 15, 7, 3, 3, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 4, 10, 17, 10, 4, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 16, 40, 68, 40, 16, 16, 16, 16, 16, 16, 31, 0, 0, 16, 40, 71, 40, 16, 0, 0, 31, 16, 16, 16, 16, 16, 16, 40, 68, 40, 16, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ };
+ oled_write_raw_P(raw_logo, sizeof(raw_logo));
+}
+static void render_logo_font(void) {
+ static const char PROGMEM qmk_logo[] = {
+ 0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xCB, 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0xCB, 0xCB, 0xCB, 0x9C, 0x9D, 0xCB, 0xCB,
+ 0xE0, 0xE1, 0xE2, 0xE3, 0xE4, 0xCB, 0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xCB, 0xCB, 0xBB, 0xBC, 0xBD, 0xBE, 0xCB,
+ 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xCB, 0x88, 0x89, 0x8A, 0x8B, 0x8A, 0x8B, 0x8C, 0x8D, 0xCB, 0xCB, 0xDB, 0xDC, 0xDD, 0xDE, 0xCB,
+ 0xEC, 0xED, 0xEE, 0xEF, 0xF0, 0xCB, 0xA8, 0xA9, 0xAA, 0xAB, 0xAA, 0xAB, 0xAC, 0xAD, 0xCB, 0xFA, 0xFB, 0xFC, 0xFD, 0xFE, 0xFF, 0x00
+ };
+
+ oled_write_P(qmk_logo, false);
+}
+/* Shows the name of the current layer and locks for the host (CAPS etc.) */
+static void render_info(void) {
+ oled_write_P(PSTR("Layer: "), false);
+
+ switch (get_highest_layer(layer_state)) {
+ case _HOME:
+ oled_write_ln_P(PSTR("HOME"), false);
+ break;
+ case _MISC:
+ oled_write_ln_P(PSTR("MISC"), false);
+ break;
+ case _RGB:
+ oled_write_ln_P(PSTR("RGB"), false);
+ break;
+ case _BLED:
+ oled_write_ln_P(PSTR("Backlight"), false);
+ break;
+ default:
+ oled_write_ln_P(PSTR("Undefined"), false);
+ }
+ led_t led_state = host_keyboard_led_state();
+ oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false);
+ oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false);
+ oled_write_ln_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false);
+}
+static void render_rgbled_status(bool) {
+ char string[4];
+ if (RGBLIGHT_MODES > 1 && rgblight_is_enabled() && get_highest_layer(layer_state) == _RGB) {
+ uint16_t m = rgblight_get_mode();
+ string[3] = '\0';
+ string[2] = '0' + m % 10;
+ string[1] = ( m /= 10) % 10 ? '0' + (m) % 10 : (m / 10) % 10 ? '0' : ' ';
+ string[0] = m / 10 ? '0' + m / 10 : ' ';
+ oled_write_P(PSTR("Conf:"), false);
+ oled_write(string, false);
+ uint16_t h = rgblight_get_hue()/RGBLIGHT_HUE_STEP;
+ string[3] = '\0';
+ string[2] = '0' + h % 10;
+ string[1] = ( h /= 10) % 10 ? '0' + (h) % 10 : (h / 10) % 10 ? '0' : ' ';
+ string[0] = h / 10 ? '0' + h / 10 : ' ';
+ oled_write_P(PSTR(","), false);
+ oled_write(string, false);
+ uint16_t s = rgblight_get_sat()/RGBLIGHT_SAT_STEP;
+ string[3] = '\0';
+ string[2] = '0' + s % 10;
+ string[1] = ( s /= 10) % 10 ? '0' + (s) % 10 : (s / 10) % 10 ? '0' : ' ';
+ string[0] = s / 10 ? '0' + s / 10 : ' ';
+ oled_write_P(PSTR(","), false);
+ oled_write(string, false);
+ uint16_t v = rgblight_get_val()/RGBLIGHT_VAL_STEP;
+ string[3] = '\0';
+ string[2] = '0' + v % 10;
+ string[1] = ( v /= 10) % 10 ? '0' + (v) % 10 : (v / 10) % 10 ? '0' : ' ';
+ string[0] = v / 10 ? '0' + v / 10 : ' ';
+ oled_write_P(PSTR(","), false);
+ oled_write(string, false);
+ oled_write_ln_P(PSTR("\n MOD HUE SAT VAR"), false);
+ } else {
+ oled_write_ln_P(PSTR("\n"), false);
+ }
+}
+void oled_task_user(void) {
+ static bool finished_timer = false;
+ if (!finished_timer && (timer_elapsed(startup_timer) < 1000)) {
+ render_logo();
+ } else {
+ if (!finished_timer) {
+ oled_clear();
+ finished_timer = true;
+ }
+ render_info();
+ render_rgbled_status(true);
+ render_logo_font();
+ }
+}
+#endif
diff --git a/keyboards/0xcb/1337/keymaps/conor/rules.mk b/keyboards/0xcb/1337/keymaps/conor/rules.mk
new file mode 100644
index 0000000000..1e5b99807c
--- /dev/null
+++ b/keyboards/0xcb/1337/keymaps/conor/rules.mk
@@ -0,0 +1 @@
+VIA_ENABLE = yes
diff --git a/keyboards/0xcb/1337/keymaps/default/keymap.c b/keyboards/0xcb/1337/keymaps/default/keymap.c
index 596ffabcc7..5c231298cd 100644
--- a/keyboards/0xcb/1337/keymaps/default/keymap.c
+++ b/keyboards/0xcb/1337/keymaps/default/keymap.c
@@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
-#include <stdio.h>
-
+// clang-format off
enum layer_names {
_HOME,
_MISC,
@@ -46,7 +45,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
BL_INC, BL_DEC, TO(0)
)
};
-
+// clang-format on
/* rotary encoder (SW3) - add more else if blocks for more granular layer control */
#ifdef ENCODER_ENABLE
@@ -100,10 +99,10 @@ static void render_logo(void) {
}
static void render_logo_font(void) {
static const char PROGMEM qmk_logo[] = {
- 0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xCB, 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0xCB, 0xCB, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9,
- 0xE0, 0xE1, 0xE2, 0xE3, 0xE4, 0xCB, 0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xCB, 0xCB, 0xE5, 0xE6, 0xE7, 0xE8, 0xE9,
- 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xCB, 0x88, 0x89, 0x8A, 0x8B, 0x8A, 0x8B, 0x8C, 0x8D, 0xCB, 0xCB, 0xD1, 0xD2, 0xD3, 0xD4, 0xD5,
- 0xEC, 0xED, 0xEE, 0xEF, 0xF0, 0xCB, 0xA8, 0xA9, 0xAA, 0xAB, 0xAA, 0xAB, 0xAC, 0xAD, 0xCB, 0xCB, 0xF1, 0xF2, 0xF3, 0xF4, 0xF5, 0x00
+ 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xC0, 0xC1, 0xC2, 0xC3, 0xC4,
+ 0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xE0, 0xE1, 0xE2, 0xE3, 0xE4,
+ 0x88, 0x89, 0x8A, 0x8B, 0x8A, 0x8B, 0x8C, 0x8D, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0,
+ 0xA8, 0xA9, 0xAA, 0xAB, 0xAA, 0xAB, 0xAC, 0xAD, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xEC, 0xED, 0xEE, 0xEF, 0xF0, 0x00
};
oled_write_P(qmk_logo, false);
@@ -133,24 +132,41 @@ static void render_info(void) {
oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false);
oled_write_ln_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false);
}
-static void render_rgbled_status(bool full) {
-#ifdef RGBLIGHT_ENABLE
- char buf[30];
- if (RGBLIGHT_MODES > 1 && rgblight_is_enabled() && get_highest_layer(layer_state) == _RGB) {
- if (full) {
- snprintf(buf, sizeof(buf), "RGB mode %2d: %d,%d,%d \n",
- rgblight_get_mode(),
- rgblight_get_hue()/RGBLIGHT_HUE_STEP,
- rgblight_get_sat()/RGBLIGHT_SAT_STEP,
- rgblight_get_val()/RGBLIGHT_VAL_STEP);
- } else {
- snprintf(buf, sizeof(buf), "[%2d] ", rgblight_get_mode());
- }
- oled_write(buf, false);
- } else {
- oled_write_ln_P(PSTR("\n"), false);
- }
-#endif
+static void render_rgbled_status(bool) {
+ char string[4];
+ if (RGBLIGHT_MODES > 1 && rgblight_is_enabled() && get_highest_layer(layer_state) == _RGB) {
+ uint16_t m = rgblight_get_mode();
+ string[3] = '\0';
+ string[2] = '0' + m % 10;
+ string[1] = ( m /= 10) % 10 ? '0' + (m) % 10 : (m / 10) % 10 ? '0' : ' ';
+ string[0] = m / 10 ? '0' + m / 10 : ' ';
+ oled_write_P(PSTR("Conf:"), false);
+ oled_write(string, false);
+ uint16_t h = rgblight_get_hue()/RGBLIGHT_HUE_STEP;
+ string[3] = '\0';
+ string[2] = '0' + h % 10;
+ string[1] = ( h /= 10) % 10 ? '0' + (h) % 10 : (h / 10) % 10 ? '0' : ' ';
+ string[0] = h / 10 ? '0' + h / 10 : ' ';
+ oled_write_P(PSTR(","), false);
+ oled_write(string, false);
+ uint16_t s = rgblight_get_sat()/RGBLIGHT_SAT_STEP;
+ string[3] = '\0';
+ string[2] = '0' + s % 10;
+ string[1] = ( s /= 10) % 10 ? '0' + (s) % 10 : (s / 10) % 10 ? '0' : ' ';
+ string[0] = s / 10 ? '0' + s / 10 : ' ';
+ oled_write_P(PSTR(","), false);
+ oled_write(string, false);
+ uint16_t v = rgblight_get_val()/RGBLIGHT_VAL_STEP;
+ string[3] = '\0';
+ string[2] = '0' + v % 10;
+ string[1] = ( v /= 10) % 10 ? '0' + (v) % 10 : (v / 10) % 10 ? '0' : ' ';
+ string[0] = v / 10 ? '0' + v / 10 : ' ';
+ oled_write_P(PSTR(","), false);
+ oled_write(string, false);
+ oled_write_ln_P(PSTR("\n MOD HUE SAT VAR"), false);
+ } else {
+ oled_write_ln_P(PSTR("\n"), false);
+ }
}
void oled_task_user(void) {
static bool finished_timer = false;
diff --git a/keyboards/0xcb/1337/keymaps/jakob/keymap.c b/keyboards/0xcb/1337/keymaps/jakob/keymap.c
index 14427ee6d8..f4a5c3cb49 100644
--- a/keyboards/0xcb/1337/keymaps/jakob/keymap.c
+++ b/keyboards/0xcb/1337/keymaps/jakob/keymap.c
@@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
-#include <stdio.h>
-
+// clang-format off
enum layer_names {
_HOME,
_MISC,
@@ -46,7 +45,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
BL_INC, BL_DEC, TO(0)
)
};
-
+// clang-format on
/* rotary encoder (SW3) - add more else if blocks for more granular layer control */
#ifdef ENCODER_ENABLE
@@ -100,10 +99,10 @@ static void render_logo(void) {
}
static void render_logo_font(void) {
static const char PROGMEM qmk_logo[] = {
- 0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xCB, 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0xCB, 0xCB, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9,
- 0xE0, 0xE1, 0xE2, 0xE3, 0xE4, 0xCB, 0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xCB, 0xCB, 0xE5, 0xE6, 0xE7, 0xE8, 0xE9,
- 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xCB, 0x88, 0x89, 0x8A, 0x8B, 0x8A, 0x8B, 0x8C, 0x8D, 0xCB, 0xCB, 0xD1, 0xD2, 0xD3, 0xD4, 0xD5,
- 0xEC, 0xED, 0xEE, 0xEF, 0xF0, 0xCB, 0xA8, 0xA9, 0xAA, 0xAB, 0xAA, 0xAB, 0xAC, 0xAD, 0xCB, 0xCB, 0xF1, 0xF2, 0xF3, 0xF4, 0xF5, 0x00
+ 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xC0, 0xC1, 0xC2, 0xC3, 0xC4,
+ 0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xE0, 0xE1, 0xE2, 0xE3, 0xE4,
+ 0x88, 0x89, 0x8A, 0x8B, 0x8A, 0x8B, 0x8C, 0x8D, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0,
+ 0xA8, 0xA9, 0xAA, 0xAB, 0xAA, 0xAB, 0xAC, 0xAD, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xEC, 0xED, 0xEE, 0xEF, 0xF0, 0x00
};
oled_write_P(qmk_logo, false);
@@ -133,24 +132,41 @@ static void render_info(void) {
oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false);
oled_write_ln_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false);
}
-static void render_rgbled_status(bool full) {
-#ifdef RGBLIGHT_ENABLE
- char buf[30];
- if (RGBLIGHT_MODES > 1 && rgblight_is_enabled() && get_highest_layer(layer_state) == _RGB) {
- if (full) {
- snprintf(buf, sizeof(buf), "RGB mode %2d: %d,%d,%d \n",
- rgblight_get_mode(),
- rgblight_get_hue()/RGBLIGHT_HUE_STEP,
- rgblight_get_sat()/RGBLIGHT_SAT_STEP,
- rgblight_get_val()/RGBLIGHT_VAL_STEP);
- } else {
- snprintf(buf, sizeof(buf), "[%2d] ", rgblight_get_mode());
- }
- oled_write(buf, false);
- } else {
- oled_write_ln_P(PSTR("\n"), false);
- }
-#endif
+static void render_rgbled_status(bool) {
+ char string[4];
+ if (RGBLIGHT_MODES > 1 && rgblight_is_enabled() && get_highest_layer(layer_state) == _RGB) {
+ uint16_t m = rgblight_get_mode();
+ string[3] = '\0';
+ string[2] = '0' + m % 10;
+ string[1] = ( m /= 10) % 10 ? '0' + (m) % 10 : (m / 10) % 10 ? '0' : ' ';
+ string[0] = m / 10 ? '0' + m / 10 : ' ';
+ oled_write_P(PSTR("Conf:"), false);
+ oled_write(string, false);
+ uint16_t h = rgblight_get_hue()/RGBLIGHT_HUE_STEP;
+ string[3] = '\0';
+ string[2] = '0' + h % 10;
+ string[1] = ( h /= 10) % 10 ? '0' + (h) % 10 : (h / 10) % 10 ? '0' : ' ';
+ string[0] = h / 10 ? '0' + h / 10 : ' ';
+ oled_write_P(PSTR(","), false);
+ oled_write(string, false);
+ uint16_t s = rgblight_get_sat()/RGBLIGHT_SAT_STEP;
+ string[3] = '\0';
+ string[2] = '0' + s % 10;
+ string[1] = ( s /= 10) % 10 ? '0' + (s) % 10 : (s / 10) % 10 ? '0' : ' ';
+ string[0] = s / 10 ? '0' + s / 10 : ' ';
+ oled_write_P(PSTR(","), false);
+ oled_write(string, false);
+ uint16_t v = rgblight_get_val()/RGBLIGHT_VAL_STEP;
+ string[3] = '\0';
+ string[2] = '0' + v % 10;
+ string[1] = ( v /= 10) % 10 ? '0' + (v) % 10 : (v / 10) % 10 ? '0' : ' ';
+ string[0] = v / 10 ? '0' + v / 10 : ' ';
+ oled_write_P(PSTR(","), false);
+ oled_write(string, false);
+ oled_write_ln_P(PSTR("\n MOD HUE SAT VAR"), false);
+ } else {
+ oled_write_ln_P(PSTR("\n"), false);
+ }
}
void oled_task_user(void) {
static bool finished_timer = false;
diff --git a/keyboards/0xcb/1337/keymaps/via/keymap.c b/keyboards/0xcb/1337/keymaps/via/keymap.c
index 596ffabcc7..5c231298cd 100644
--- a/keyboards/0xcb/1337/keymaps/via/keymap.c
+++ b/keyboards/0xcb/1337/keymaps/via/keymap.c
@@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
-#include <stdio.h>
-
+// clang-format off
enum layer_names {
_HOME,
_MISC,
@@ -46,7 +45,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
BL_INC, BL_DEC, TO(0)
)
};
-
+// clang-format on
/* rotary encoder (SW3) - add more else if blocks for more granular layer control */
#ifdef ENCODER_ENABLE
@@ -100,10 +99,10 @@ static void render_logo(void) {
}
static void render_logo_font(void) {
static const char PROGMEM qmk_logo[] = {
- 0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xCB, 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0xCB, 0xCB, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9,
- 0xE0, 0xE1, 0xE2, 0xE3, 0xE4, 0xCB, 0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xCB, 0xCB, 0xE5, 0xE6, 0xE7, 0xE8, 0xE9,
- 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xCB, 0x88, 0x89, 0x8A, 0x8B, 0x8A, 0x8B, 0x8C, 0x8D, 0xCB, 0xCB, 0xD1, 0xD2, 0xD3, 0xD4, 0xD5,
- 0xEC, 0xED, 0xEE, 0xEF, 0xF0, 0xCB, 0xA8, 0xA9, 0xAA, 0xAB, 0xAA, 0xAB, 0xAC, 0xAD, 0xCB, 0xCB, 0xF1, 0xF2, 0xF3, 0xF4, 0xF5, 0x00
+ 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xC0, 0xC1, 0xC2, 0xC3, 0xC4,
+ 0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xE0, 0xE1, 0xE2, 0xE3, 0xE4,
+ 0x88, 0x89, 0x8A, 0x8B, 0x8A, 0x8B, 0x8C, 0x8D, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0,
+ 0xA8, 0xA9, 0xAA, 0xAB, 0xAA, 0xAB, 0xAC, 0xAD, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xEC, 0xED, 0xEE, 0xEF, 0xF0, 0x00
};
oled_write_P(qmk_logo, false);
@@ -133,24 +132,41 @@ static void render_info(void) {
oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false);
oled_write_ln_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false);
}
-static void render_rgbled_status(bool full) {
-#ifdef RGBLIGHT_ENABLE
- char buf[30];
- if (RGBLIGHT_MODES > 1 && rgblight_is_enabled() && get_highest_layer(layer_state) == _RGB) {
- if (full) {
- snprintf(buf, sizeof(buf), "RGB mode %2d: %d,%d,%d \n",
- rgblight_get_mode(),
- rgblight_get_hue()/RGBLIGHT_HUE_STEP,
- rgblight_get_sat()/RGBLIGHT_SAT_STEP,
- rgblight_get_val()/RGBLIGHT_VAL_STEP);
- } else {
- snprintf(buf, sizeof(buf), "[%2d] ", rgblight_get_mode());
- }
- oled_write(buf, false);
- } else {
- oled_write_ln_P(PSTR("\n"), false);
- }
-#endif
+static void render_rgbled_status(bool) {
+ char string[4];
+ if (RGBLIGHT_MODES > 1 && rgblight_is_enabled() && get_highest_layer(layer_state) == _RGB) {
+ uint16_t m = rgblight_get_mode();
+ string[3] = '\0';
+ string[2] = '0' + m % 10;
+ string[1] = ( m /= 10) % 10 ? '0' + (m) % 10 : (m / 10) % 10 ? '0' : ' ';
+ string[0] = m / 10 ? '0' + m / 10 : ' ';
+ oled_write_P(PSTR("Conf:"), false);
+ oled_write(string, false);
+ uint16_t h = rgblight_get_hue()/RGBLIGHT_HUE_STEP;
+ string[3] = '\0';
+ string[2] = '0' + h % 10;
+ string[1] = ( h /= 10) % 10 ? '0' + (h) % 10 : (h / 10) % 10 ? '0' : ' ';
+ string[0] = h / 10 ? '0' + h / 10 : ' ';
+ oled_write_P(PSTR(","), false);
+ oled_write(string, false);
+ uint16_t s = rgblight_get_sat()/RGBLIGHT_SAT_STEP;
+ string[3] = '\0';
+ string[2] = '0' + s % 10;
+ string[1] = ( s /= 10) % 10 ? '0' + (s) % 10 : (s / 10) % 10 ? '0' : ' ';
+ string[0] = s / 10 ? '0' + s / 10 : ' ';
+ oled_write_P(PSTR(","), false);
+ oled_write(string, false);
+ uint16_t v = rgblight_get_val()/RGBLIGHT_VAL_STEP;
+ string[3] = '\0';
+ string[2] = '0' + v % 10;
+ string[1] = ( v /= 10) % 10 ? '0' + (v) % 10 : (v / 10) % 10 ? '0' : ' ';
+ string[0] = v / 10 ? '0' + v / 10 : ' ';
+ oled_write_P(PSTR(","), false);
+ oled_write(string, false);
+ oled_write_ln_P(PSTR("\n MOD HUE SAT VAR"), false);
+ } else {
+ oled_write_ln_P(PSTR("\n"), false);
+ }
}
void oled_task_user(void) {
static bool finished_timer = false;
diff --git a/keyboards/0xcb/1337/readme.md b/keyboards/0xcb/1337/readme.md
index da54eb78fc..8fef5be7b4 100644
--- a/keyboards/0xcb/1337/readme.md
+++ b/keyboards/0xcb/1337/readme.md
@@ -3,16 +3,16 @@
Macro keypad
* Keyboard Maintainer: [Conor Burns](https://github.com/conor-burns)
-* Hardware Supported: https://github.com/conor-burns/0xcb-1337
-* Hardware Availability: Soon on tindie or order your own parts - the hardware in the repo is Open Source :D
+* Hardware Supported: https://github.com/0xcb-dev/0xcb-1337
+* Hardware Availability: On [tindie](https://www.tindie.com/products/0xcb/0xcb-1337-a-customizable-macro-keyboard-with-qmk/) or order your own parts - the hardware in the repo is Open Source :D
* PCB renders :)
-
+
-
+
-
-To go to bootloader press row 0 col 0 key (top left) while plugging in the board.
+More Pictures [here](https://0xcb.dev/1337/)
+To go to bootloader press row 0 col 0 key (top left) while plugging in the board. (Or press the reset button on V2.0 and v3.0)
Make example for this keyboard (after setting up your build environment):