diff --git a/keyboards/aleblazer/zodiark/config.h b/keyboards/aleblazer/zodiark/config.h
new file mode 100644
index 0000000000..84795f024b
--- /dev/null
+++ b/keyboards/aleblazer/zodiark/config.h
@@ -0,0 +1,75 @@
+/*
+Copyright 2021 Spencer Deven <splitlogicdesign@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xF901
+#define PRODUCT_ID 0xF902
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Aleblazer
+#define PRODUCT Zodiark
+
+#define NO_ACTION_MACRO
+
+#define SOFT_SERIAL_PIN D3
+#define SERIAL_USE_MULTI_TRANSACTION
+#define SELECT_SOFT_SERIAL_SPEED 1
+
+/* key matrix size */
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 7
+#define DIODE_DIRECTION COL2ROW
+
+#define ENCODERS_PAD_A { D2 }
+#define ENCODERS_PAD_B { D4 }
+#define ENCODERS_PAD_A_RIGHT { D4 }
+#define ENCODERS_PAD_B_RIGHT { D2 }
+#define ENCODER_RESOLUTION 3
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { C6, D7, E6, B4, F4 }
+#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6 }
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+#define RGB_DI_PIN B5
+
+#ifdef RGBLIGHT_ENABLE
+#define RGBLED_NUM 68
+#define RGBLIGHT_SPLIT
+#define RGBLED_SPLIT { 34, 34 }
+#define RGBLIGHT_LIMIT_VAL 170
+#define RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+
+#ifdef RGB_MATRIX_ENABLE
+#define DRIVER_LED_TOTAL 68
+#define RGB_MATRIX_SPLIT { 34, 34 }
+#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
+#define RGB_MATRIX_KEYPRESSES
+#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+#define RGB_MATRIX_HUE_STEP 8
+#define RGB_MATRIX_SAT_STEP 8
+#define RGB_MATRIX_VAL_STEP 8
+#define RGB_MATRIX_SPD_STEP 10
+#endif
diff --git a/keyboards/aleblazer/zodiark/info.json b/keyboards/aleblazer/zodiark/info.json
new file mode 100644
index 0000000000..e0acaaa466
--- /dev/null
+++ b/keyboards/aleblazer/zodiark/info.json
@@ -0,0 +1,12 @@
+{
+ "keyboard_name": "zodiark",
+ "url": "https://github.com/Aleblazer/qmk_firmware/tree/master/keyboards/zodiark",
+ "maintainer": "Aleblazer",
+ "width": 19,
+ "height": 8.48,
+ "layouts": {
+ "LAYOUT": {
+ "layout": [{"label":"L03", "x":3, "y":0}, {"label":"R03", "x":15, "y":0}, {"label":"L02", "x":2, "y":0.125}, {"label":"L04", "x":4, "y":0.125}, {"label":"R02", "x":14, "y":0.125}, {"label":"R04", "x":16, "y":0.125}, {"label":"L05", "x":5, "y":0.25}, {"label":"R01", "x":13, "y":0.25}, {"label":"L00", "x":0, "y":0.53}, {"label":"L01", "x":1, "y":0.53}, {"label":"R05", "x":17, "y":0.53}, {"label":"R06", "x":18, "y":0.53}, {"label":"L13", "x":3, "y":1}, {"label":"R13", "x":15, "y":1}, {"label":"L12", "x":2, "y":1.125}, {"label":"L14", "x":4, "y":1.125}, {"label":"R12", "x":14, "y":1.125}, {"label":"R14", "x":16, "y":1.125}, {"label":"L15", "x":5, "y":1.25}, {"label":"R11", "x":13, "y":1.25}, {"label":"L10", "x":0, "y":1.53}, {"label":"L11", "x":1, "y":1.53}, {"label":"R15", "x":17, "y":1.53}, {"label":"R16", "x":18, "y":1.53}, {"label":"L06", "x":6, "y":1.7000000000000002}, {"label":"R00", "x":12, "y":1.7000000000000002}, {"label":"L23", "x":3, "y":2.0}, {"label":"R23", "x":15, "y":2.0}, {"label":"L22", "x":2, "y":2.125}, {"label":"L24", "x":4, "y":2.125}, {"label":"R22", "x":14, "y":2.125}, {"label":"R24", "x":16, "y":2.125}, {"label":"L25", "x":5, "y":2.25}, {"label":"R21", "x":13, "y":2.25}, {"label":"L20", "x":0, "y":2.5300000000000002}, {"label":"L21", "x":1, "y":2.5300000000000002}, {"label":"R25", "x":17, "y":2.5300000000000002}, {"label":"R26", "x":18, "y":2.5300000000000002}, {"label":"L16", "x":6, "y":2.7}, {"label":"R10", "x":12, "y":2.7}, {"label":"L33", "x":3, "y":3.0000000000000004}, {"label":"R33", "x":15, "y":3.0000000000000004}, {"label":"L32", "x":2, "y":3.1250000000000004}, {"label":"L34", "x":4, "y":3.1250000000000004}, {"label":"R32", "x":14, "y":3.1250000000000004}, {"label":"R34", "x":16, "y":3.1250000000000004}, {"label":"L35", "x":5, "y":3.2500000000000004}, {"label":"R31", "x":13, "y":3.2500000000000004}, {"label":"L30", "x":0, "y":3.5300000000000002}, {"label":"L31", "x":1, "y":3.5300000000000002}, {"label":"R35", "x":17, "y":3.5300000000000002}, {"label":"R36", "x":18, "y":3.5300000000000002}, {"label":"L43", "x":3, "y":4.0}, {"label":"R43", "x":15, "y":4.0}, {"label":"L42", "x":2, "y":4.125}, {"label":"R44", "x":16, "y":4.125}, {"label":"L44", "x":4, "y":4.13}, {"label":"R42", "x":14, "y":4.13}, {"label":"L40", "x":0, "y":4.53}, {"label":"L41", "x":1, "y":4.53}, {"label":"R45", "x":17, "y":4.53}, {"label":"R46", "x":18, "y":4.53}, {"label":"L26", "x":-0.33, "y":5.13}, {"label":"L36", "x":0.6699999999999999, "y":5.13}, {"label":"L45", "x":-0.83, "y":6.13, "w":1.5}, {"label":"L46", "x":0.67, "y":6.13}, {"label":"R30", "x":-2.1, "y":6.48}, {"label":"R20", "x":-1.1, "y":6.48}, {"label":"R40", "x":-2.1, "y":7.48}, {"label":"R41", "x":-1.1, "y":7.48, "w":1.5}]
+ }
+ }
+}
diff --git a/keyboards/aleblazer/zodiark/keymaps/default/config.h b/keyboards/aleblazer/zodiark/keymaps/default/config.h
new file mode 100644
index 0000000000..0c89f634bc
--- /dev/null
+++ b/keyboards/aleblazer/zodiark/keymaps/default/config.h
@@ -0,0 +1,22 @@
+/*
+Copyright 2021 Spencer Deven <splitlogicdesign@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#pragma once
+
+#ifdef OLED_DRIVER_ENABLE
+ #define OLED_DISPLAY_128X64
+ #define OLED_TIMEOUT 400000
+#endif
diff --git a/keyboards/aleblazer/zodiark/keymaps/default/keymap.c b/keyboards/aleblazer/zodiark/keymaps/default/keymap.c
new file mode 100644
index 0000000000..0692aee124
--- /dev/null
+++ b/keyboards/aleblazer/zodiark/keymaps/default/keymap.c
@@ -0,0 +1,327 @@
+/*
+Copyright 2021 Spencer Deven <splitlogicdesign@gmail.com>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+enum sofle_layers {
+ /* _M_XYZ = Mac Os, _W_XYZ = Win/Linux */
+ _QWERTY,
+ _COLEMAK,
+ _LOWER,
+ _RAISE,
+ _ADJUST,
+};
+
+enum custom_keycodes {
+ KC_QWERTY = SAFE_RANGE,
+ KC_COLEMAK,
+ KC_LOWER,
+ KC_RAISE,
+ KC_ADJUST,
+ KC_PRVWD,
+ KC_NXTWD,
+ KC_LSTRT,
+ KC_LEND,
+ KC_DLINE
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ [_QWERTY] = LAYOUT(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LBRC, KC_RBRC, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS,
+ KC_ADJUST, KC_A, KC_S, KC_D, KC_F, KC_G, KC_MINS, KC_EQL, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_GRV, KC_MUTE, RGB_TOG, KC_DEL,KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT ,
+ KC_LCTL, KC_LALT, KC_LGUI, LALT(KC_TAB), KC_LOWER, KC_SPC, KC_ENT, KC_ENT, KC_SPC, KC_RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT
+ ),
+
+ [_LOWER] = LAYOUT(
+ _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11,
+ KC_PSLS, KC_P7, KC_P8, KC_P9, KC_NLCK, _______, _______, _______, _______, KC_PSLS, KC_P7, KC_P8, KC_P9, KC_F12,
+ KC_CAPS, KC_P4, KC_P5, KC_P6, KC_NLCK, _______, _______, _______, _______, _______, KC_P4, KC_P5, KC_P6, KC_NLCK,
+ _______, KC_P1, KC_P2, KC_P3, _______, _______, _______, _______, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, _______,
+ _______, KC_P0, KC_PDOT, KC_PENT, _______, _______, _______, _______, _______, _______, KC_P0, KC_PDOT, KC_PENT, _______
+ ),
+
+ [_RAISE] = LAYOUT(
+ _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11,
+ KC_PSLS, KC_P7, KC_P8, KC_P9, KC_NLCK, _______, _______, _______, _______, KC_PSLS, KC_P7, KC_P8, KC_P9, KC_F12,
+ KC_CAPS, KC_P4, KC_P5, KC_P6, KC_NLCK, _______, _______, _______, _______, _______, KC_P4, KC_P5, KC_P6, KC_NLCK,
+ _______, KC_P1, KC_P2, KC_P3, _______, _______, _______, _______, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, _______,
+ _______, KC_P0, KC_PDOT, KC_PENT, _______, _______, _______, _______, _______, _______, KC_P0, KC_PDOT, KC_PENT, _______
+ ),
+
+ [_ADJUST] = LAYOUT(
+ _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, EEP_RST, _______, _______, _______, KC_F12,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_MOD, RGB_SPI, RGB_HUI, RGB_SAI, RGB_VAI,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_RMOD, RGB_SPD, RGB_HUD, RGB_SAD, RGB_VAD
+ )
+
+};
+#ifdef OLED_DRIVER_ENABLE
+
+static void render_logo(void) {
+ static const char PROGMEM qmk_logo[] = {
+ 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
+ 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
+ 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0
+ };
+
+ oled_write_P(qmk_logo, false);
+}
+
+static void print_status_narrow(void) {
+ // Print current mode
+ oled_write_P(PSTR("\n\n"), false);
+ oled_write_ln_P(PSTR("MODE"), false);
+ oled_write_ln_P(PSTR(""), false);
+ if (keymap_config.swap_lctl_lgui) {
+ oled_write_ln_P(PSTR("MAC"), false);
+ } else {
+ oled_write_ln_P(PSTR("WIN"), false);
+ }
+
+ switch (get_highest_layer(default_layer_state)) {
+ case _QWERTY:
+ oled_write_ln_P(PSTR("Qwrt"), false);
+ break;
+ case _COLEMAK:
+ oled_write_ln_P(PSTR("Clmk"), false);
+ break;
+ default:
+ oled_write_P(PSTR("Undef"), false);
+ }
+ oled_write_P(PSTR("\n\n"), false);
+ // Print current layer
+ oled_write_ln_P(PSTR("LAYER"), false);
+ switch (get_highest_layer(layer_state)) {
+ case _COLEMAK:
+ case _QWERTY:
+ oled_write_P(PSTR("Base\n"), false);
+ break;
+ case _RAISE:
+ oled_write_P(PSTR("Raise"), false);
+ break;
+ case _LOWER:
+ oled_write_P(PSTR("Lower"), false);
+ break;
+ case _ADJUST:
+ oled_write_P(PSTR("Adj\n"), false);
+ break;
+ default:
+ oled_write_ln_P(PSTR("Undef"), false);
+ }
+ oled_write_P(PSTR("\n\n"), false);
+ led_t led_usb_state = host_keyboard_led_state();
+ oled_write_ln_P(PSTR("CPSLK"), led_usb_state.caps_lock);
+}
+
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+ if (is_keyboard_master()) {
+ return OLED_ROTATION_90;
+ }
+ return rotation;
+}
+
+void oled_task_user(void) {
+ if (is_keyboard_master()) {
+ print_status_narrow();
+ } else {
+ render_logo();
+ }
+}
+
+#endif
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case KC_QWERTY:
+ if (record->event.pressed) {
+ set_single_persistent_default_layer(_QWERTY);
+ }
+ return false;
+ case KC_COLEMAK:
+ if (record->event.pressed) {
+ set_single_persistent_default_layer(_COLEMAK);
+ }
+ return false;
+ case KC_LOWER:
+ if (record->event.pressed) {
+ layer_on(_LOWER);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_LOWER);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ case KC_RAISE:
+ if (record->event.pressed) {
+ layer_on(_RAISE);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_RAISE);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ case KC_ADJUST:
+ if (record->event.pressed) {
+ layer_on(_ADJUST);
+ } else {
+ layer_off(_ADJUST);
+ }
+ return false;
+ case KC_PRVWD:
+ if (record->event.pressed) {
+ if (keymap_config.swap_lctl_lgui) {
+ register_mods(mod_config(MOD_LALT));
+ register_code(KC_LEFT);
+ } else {
+ register_mods(mod_config(MOD_LCTL));
+ register_code(KC_LEFT);
+ }
+ } else {
+ if (keymap_config.swap_lctl_lgui) {
+ unregister_mods(mod_config(MOD_LALT));
+ unregister_code(KC_LEFT);
+ } else {
+ unregister_mods(mod_config(MOD_LCTL));
+ unregister_code(KC_LEFT);
+ }
+ }
+ break;
+ case KC_NXTWD:
+ if (record->event.pressed) {
+ if (keymap_config.swap_lctl_lgui) {
+ register_mods(mod_config(MOD_LALT));
+ register_code(KC_RIGHT);
+ } else {
+ register_mods(mod_config(MOD_LCTL));
+ register_code(KC_RIGHT);
+ }
+ } else {
+ if (keymap_config.swap_lctl_lgui) {
+ unregister_mods(mod_config(MOD_LALT));
+ unregister_code(KC_RIGHT);
+ } else {
+ unregister_mods(mod_config(MOD_LCTL));
+ unregister_code(KC_RIGHT);
+ }
+ }
+ break;
+ case KC_LSTRT:
+ if (record->event.pressed) {
+ if (keymap_config.swap_lctl_lgui) {
+ //CMD-arrow on Mac, but we have CTL and GUI swapped
+ register_mods(mod_config(MOD_LCTL));
+ register_code(KC_LEFT);
+ } else {
+ register_code(KC_HOME);
+ }
+ } else {
+ if (keymap_config.swap_lctl_lgui) {
+ unregister_mods(mod_config(MOD_LCTL));
+ unregister_code(KC_LEFT);
+ } else {
+ unregister_code(KC_HOME);
+ }
+ }
+ break;
+ case KC_LEND:
+ if (record->event.pressed) {
+ if (keymap_config.swap_lctl_lgui) {
+ //CMD-arrow on Mac, but we have CTL and GUI swapped
+ register_mods(mod_config(MOD_LCTL));
+ register_code(KC_RIGHT);
+ } else {
+ register_code(KC_END);
+ }
+ } else {
+ if (keymap_config.swap_lctl_lgui) {
+ unregister_mods(mod_config(MOD_LCTL));
+ unregister_code(KC_RIGHT);
+ } else {
+ unregister_code(KC_END);
+ }
+ }
+ break;
+ case KC_DLINE:
+ if (record->event.pressed) {
+ register_mods(mod_config(MOD_LCTL));
+ register_code(KC_BSPC);
+ } else {
+ unregister_mods(mod_config(MOD_LCTL));
+ unregister_code(KC_BSPC);
+ }
+ break;
+ case KC_COPY:
+ if (record->event.pressed) {
+ register_mods(mod_config(MOD_LCTL));
+ register_code(KC_C);
+ } else {
+ unregister_mods(mod_config(MOD_LCTL));
+ unregister_code(KC_C);
+ }
+ return false;
+ case KC_PASTE:
+ if (record->event.pressed) {
+ register_mods(mod_config(MOD_LCTL));
+ register_code(KC_V);
+ } else {
+ unregister_mods(mod_config(MOD_LCTL));
+ unregister_code(KC_V);
+ }
+ return false;
+ case KC_CUT:
+ if (record->event.pressed) {
+ register_mods(mod_config(MOD_LCTL));
+ register_code(KC_X);
+ } else {
+ unregister_mods(mod_config(MOD_LCTL));
+ unregister_code(KC_X);
+ }
+ return false;
+ break;
+ case KC_UNDO:
+ if (record->event.pressed) {
+ register_mods(mod_config(MOD_LCTL));
+ register_code(KC_Z);
+ } else {
+ unregister_mods(mod_config(MOD_LCTL));
+ unregister_code(KC_Z);
+ }
+ return false;
+ }
+ return true;
+}
+
+#ifdef ENCODER_ENABLE
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+ if (index == 0) {
+ if (clockwise) {
+ tap_code(KC_VOLU);
+ } else {
+ tap_code(KC_VOLD);
+ }
+ } else if (index == 1) {
+ if (clockwise) {
+ rgblight_step();
+ } else {
+ rgblight_step_reverse();
+ }
+ }
+}
+
+#endif
diff --git a/keyboards/aleblazer/zodiark/keymaps/default/rules.mk b/keyboards/aleblazer/zodiark/keymaps/default/rules.mk
new file mode 100644
index 0000000000..1e3cebb145
--- /dev/null
+++ b/keyboards/aleblazer/zodiark/keymaps/default/rules.mk
@@ -0,0 +1 @@
+RGBLIGHT_ENABLE = yes
diff --git a/keyboards/aleblazer/zodiark/keymaps/slimoled/config.h b/keyboards/aleblazer/zodiark/keymaps/slimoled/config.h
new file mode 100644
index 0000000000..36d9637e72
--- /dev/null
+++ b/keyboards/aleblazer/zodiark/keymaps/slimoled/config.h
@@ -0,0 +1,22 @@
+/*
+Copyright 2021 Spencer Deven <splitlogicdesign@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#pragma once
+
+#ifdef OLED_DRIVER_ENABLE
+ #define OLED_DISPLAY_128X32
+ #define OLED_TIMEOUT 400000
+#endif
diff --git a/keyboards/aleblazer/zodiark/keymaps/slimoled/keymap.c b/keyboards/aleblazer/zodiark/keymaps/slimoled/keymap.c
new file mode 100644
index 0000000000..4e98b5cf0d
--- /dev/null
+++ b/keyboards/aleblazer/zodiark/keymaps/slimoled/keymap.c
@@ -0,0 +1,330 @@
+/*
+Copyright 2021 Spencer Deven <splitlogicdesign@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+enum sofle_layers {
+ /* _M_XYZ = Mac Os, _W_XYZ = Win/Linux */
+ _QWERTY,
+ _COLEMAK,
+ _LOWER,
+ _RAISE,
+ _ADJUST,
+};
+
+enum custom_keycodes {
+ KC_QWERTY = SAFE_RANGE,
+ KC_COLEMAK,
+ KC_LOWER,
+ KC_RAISE,
+ KC_ADJUST,
+ KC_PRVWD,
+ KC_NXTWD,
+ KC_LSTRT,
+ KC_LEND,
+ KC_DLINE
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ [_QWERTY] = LAYOUT(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LBRC, KC_RBRC, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS,
+ KC_ADJUST, KC_A, KC_S, KC_D, KC_F, KC_G, KC_MINS, KC_EQL, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_GRV, KC_MUTE, RGB_TOG, KC_DEL,KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT ,
+ KC_LCTL, KC_LALT, KC_LGUI, LALT(KC_TAB), KC_LOWER, KC_SPC, KC_ENT, KC_ENT, KC_SPC, KC_RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT
+ ),
+
+ [_LOWER] = LAYOUT(
+ _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11,
+ KC_PSLS, KC_P7, KC_P8, KC_P9, KC_NLCK, _______, _______, _______, _______, KC_PSLS, KC_P7, KC_P8, KC_P9, KC_F12,
+ KC_CAPS, KC_P4, KC_P5, KC_P6, KC_NLCK, _______, _______, _______, _______, _______, KC_P4, KC_P5, KC_P6, KC_NLCK,
+ _______, KC_P1, KC_P2, KC_P3, _______, _______, _______, _______, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, _______,
+ _______, KC_P0, KC_PDOT, KC_PENT, _______, _______, _______, _______, _______, _______, KC_P0, KC_PDOT, KC_PENT, _______
+ ),
+
+ [_RAISE] = LAYOUT(
+ _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11,
+ KC_PSLS, KC_P7, KC_P8, KC_P9, KC_NLCK, _______, _______, _______, _______, KC_PSLS, KC_P7, KC_P8, KC_P9, KC_F12,
+ KC_CAPS, KC_P4, KC_P5, KC_P6, KC_NLCK, _______, _______, _______, _______, _______, KC_P4, KC_P5, KC_P6, KC_NLCK,
+ _______, KC_P1, KC_P2, KC_P3, _______, _______, _______, _______, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, _______,
+ _______, KC_P0, KC_PDOT, KC_PENT, _______, _______, _______, _______, _______, _______, KC_P0, KC_PDOT, KC_PENT, _______
+ ),
+
+ [_ADJUST] = LAYOUT(
+ _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, EEP_RST, _______, _______, _______, KC_F12,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_MOD, RGB_SPI, RGB_HUI, RGB_SAI, RGB_VAI,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_RMOD, RGB_SPD, RGB_HUD, RGB_SAD, RGB_VAD
+ )
+
+};
+#ifdef OLED_DRIVER_ENABLE
+
+static void render_logo(void) {
+ static const char PROGMEM qmk_logo[] = {
+ 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
+ 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
+ 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0
+ };
+
+ oled_write_P(qmk_logo, false);
+}
+
+static void print_status_narrow(void) {
+ // Print current mode
+ oled_write_P(PSTR("\n\n"), false);
+ oled_write_ln_P(PSTR("MODE"), false);
+ oled_write_ln_P(PSTR(""), false);
+ if (keymap_config.swap_lctl_lgui) {
+ oled_write_ln_P(PSTR("MAC"), false);
+ } else {
+ oled_write_ln_P(PSTR("WIN"), false);
+ }
+
+ switch (get_highest_layer(default_layer_state)) {
+ case _QWERTY:
+ oled_write_ln_P(PSTR("Qwrt"), false);
+ break;
+ case _COLEMAK:
+ oled_write_ln_P(PSTR("Clmk"), false);
+ break;
+ default:
+ oled_write_P(PSTR("Undef"), false);
+ }
+ oled_write_P(PSTR("\n\n"), false);
+ // Print current layer
+ oled_write_ln_P(PSTR("LAYER"), false);
+ switch (get_highest_layer(layer_state)) {
+ case _COLEMAK:
+ case _QWERTY:
+ oled_write_P(PSTR("Base\n"), false);
+ break;
+ case _RAISE:
+ oled_write_P(PSTR("Raise"), false);
+ break;
+ case _LOWER:
+ oled_write_P(PSTR("Lower"), false);
+ break;
+ case _ADJUST:
+ oled_write_P(PSTR("Adj\n"), false);
+ break;
+ default:
+ oled_write_ln_P(PSTR("Undef"), false);
+ }
+ oled_write_P(PSTR("\n\n"), false);
+ led_t led_usb_state = host_keyboard_led_state();
+ oled_write_ln_P(PSTR("CPSLK"), led_usb_state.caps_lock);
+}
+
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+ if (is_keyboard_master()) {
+ return OLED_ROTATION_90;
+ }
+ return rotation;
+}
+
+void oled_task_user(void) {
+ if (is_keyboard_master()) {
+ print_status_narrow();
+ } else {
+ render_logo();
+ }
+}
+
+#endif
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case KC_QWERTY:
+ if (record->event.pressed) {
+ set_single_persistent_default_layer(_QWERTY);
+ }
+ return false;
+ case KC_COLEMAK:
+ if (record->event.pressed) {
+ set_single_persistent_default_layer(_COLEMAK);
+ }
+ return false;
+ case KC_LOWER:
+ if (record->event.pressed) {
+ layer_on(_LOWER);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_LOWER);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ case KC_RAISE:
+ if (record->event.pressed) {
+ layer_on(_RAISE);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_RAISE);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ case KC_ADJUST:
+ if (record->event.pressed) {
+ layer_on(_ADJUST);
+ } else {
+ layer_off(_ADJUST);
+ }
+ return false;
+ case KC_PRVWD:
+ if (record->event.pressed) {
+ if (keymap_config.swap_lctl_lgui) {
+ register_mods(mod_config(MOD_LALT));
+ register_code(KC_LEFT);
+ } else {
+ register_mods(mod_config(MOD_LCTL));
+ register_code(KC_LEFT);
+ }
+ } else {
+ if (keymap_config.swap_lctl_lgui) {
+ unregister_mods(mod_config(MOD_LALT));
+ unregister_code(KC_LEFT);
+ } else {
+ unregister_mods(mod_config(MOD_LCTL));
+ unregister_code(KC_LEFT);
+ }
+ }
+ break;
+ case KC_NXTWD:
+ if (record->event.pressed) {
+ if (keymap_config.swap_lctl_lgui) {
+ register_mods(mod_config(MOD_LALT));
+ register_code(KC_RIGHT);
+ } else {
+ register_mods(mod_config(MOD_LCTL));
+ register_code(KC_RIGHT);
+ }
+ } else {
+ if (keymap_config.swap_lctl_lgui) {
+ unregister_mods(mod_config(MOD_LALT));
+ unregister_code(KC_RIGHT);
+ } else {
+ unregister_mods(mod_config(MOD_LCTL));
+ unregister_code(KC_RIGHT);
+ }
+ }
+ break;
+ case KC_LSTRT:
+ if (record->event.pressed) {
+ if (keymap_config.swap_lctl_lgui) {
+ //CMD-arrow on Mac, but we have CTL and GUI swapped
+ register_mods(mod_config(MOD_LCTL));
+ register_code(KC_LEFT);
+ } else {
+ register_code(KC_HOME);
+ }
+ } else {
+ if (keymap_config.swap_lctl_lgui) {
+ unregister_mods(mod_config(MOD_LCTL));
+ unregister_code(KC_LEFT);
+ } else {
+ unregister_code(KC_HOME);
+ }
+ }
+ break;
+ case KC_LEND:
+ if (record->event.pressed) {
+ if (keymap_config.swap_lctl_lgui) {
+ //CMD-arrow on Mac, but we have CTL and GUI swapped
+ register_mods(mod_config(MOD_LCTL));
+ register_code(KC_RIGHT);
+ } else {
+ register_code(KC_END);
+ }
+ } else {
+ if (keymap_config.swap_lctl_lgui) {
+ unregister_mods(mod_config(MOD_LCTL));
+ unregister_code(KC_RIGHT);
+ } else {
+ unregister_code(KC_END);
+ }
+ }
+ break;
+ case KC_DLINE:
+ if (record->event.pressed) {
+ register_mods(mod_config(MOD_LCTL));
+ register_code(KC_BSPC);
+ } else {
+ unregister_mods(mod_config(MOD_LCTL));
+ unregister_code(KC_BSPC);
+ }
+ break;
+ case KC_COPY:
+ if (record->event.pressed) {
+ register_mods(mod_config(MOD_LCTL));
+ register_code(KC_C);
+ } else {
+ unregister_mods(mod_config(MOD_LCTL));
+ unregister_code(KC_C);
+ }
+ return false;
+ case KC_PASTE:
+ if (record->event.pressed) {
+ register_mods(mod_config(MOD_LCTL));
+ register_code(KC_V);
+ } else {
+ unregister_mods(mod_config(MOD_LCTL));
+ unregister_code(KC_V);
+ }
+ return false;
+ case KC_CUT:
+ if (record->event.pressed) {
+ register_mods(mod_config(MOD_LCTL));
+ register_code(KC_X);
+ } else {
+ unregister_mods(mod_config(MOD_LCTL));
+ unregister_code(KC_X);
+ }
+ return false;
+ break;
+ case KC_UNDO:
+ if (record->event.pressed) {
+ register_mods(mod_config(MOD_LCTL));
+ register_code(KC_Z);
+ } else {
+ unregister_mods(mod_config(MOD_LCTL));
+ unregister_code(KC_Z);
+ }
+ return false;
+ }
+ return true;
+}
+
+#ifdef ENCODER_ENABLE
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+ if (index == 0) {
+ if (clockwise) {
+ tap_code(KC_VOLU);
+ } else {
+ tap_code(KC_VOLD);
+ }
+ } else if (index == 1) {
+ if (clockwise) {
+ rgblight_step();
+ } else {
+ rgblight_step_reverse();
+ }
+ }
+}
+
+#endif
diff --git a/keyboards/aleblazer/zodiark/keymaps/slimoled/rules.mk b/keyboards/aleblazer/zodiark/keymaps/slimoled/rules.mk
new file mode 100644
index 0000000000..1e3cebb145
--- /dev/null
+++ b/keyboards/aleblazer/zodiark/keymaps/slimoled/rules.mk
@@ -0,0 +1 @@
+RGBLIGHT_ENABLE = yes
diff --git a/keyboards/aleblazer/zodiark/keymaps/via/config.h b/keyboards/aleblazer/zodiark/keymaps/via/config.h
new file mode 100644
index 0000000000..0c89f634bc
--- /dev/null
+++ b/keyboards/aleblazer/zodiark/keymaps/via/config.h
@@ -0,0 +1,22 @@
+/*
+Copyright 2021 Spencer Deven <splitlogicdesign@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#pragma once
+
+#ifdef OLED_DRIVER_ENABLE
+ #define OLED_DISPLAY_128X64
+ #define OLED_TIMEOUT 400000
+#endif
diff --git a/keyboards/aleblazer/zodiark/keymaps/via/encoder.c b/keyboards/aleblazer/zodiark/keymaps/via/encoder.c
new file mode 100644
index 0000000000..06d7a25777
--- /dev/null
+++ b/keyboards/aleblazer/zodiark/keymaps/via/encoder.c
@@ -0,0 +1,35 @@
+/*
+Copyright 2021 Spencer Deven <splitlogicdesign@gmail.com>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+//Setting up what encoder rotation does. If your encoder can be pressed as a button, that function can be set in Via.
+
+#ifdef ENCODER_ENABLE
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+ if (index == 0) {
+ if (clockwise) {
+ tap_code(KC_VOLU);
+ } else {
+ tap_code(KC_VOLD);
+ }
+ } else if (index == 1) {
+ if (clockwise) {
+ tap_code(KC_PGDOWN);
+ } else {
+ tap_code(KC_PGUP);
+ }
+ }
+}
+
+#endif
diff --git a/keyboards/aleblazer/zodiark/keymaps/via/keymap.c b/keyboards/aleblazer/zodiark/keymaps/via/keymap.c
new file mode 100644
index 0000000000..1159afb434
--- /dev/null
+++ b/keyboards/aleblazer/zodiark/keymaps/via/keymap.c
@@ -0,0 +1,52 @@
+/*
+Copyright 2021 Spencer Deven <splitlogicdesign@gmail.com>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+#include "oled.c"
+#include "encoder.c"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ [0] = LAYOUT(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LBRC, KC_RBRC, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS,
+ MO(3), KC_A, KC_S, KC_D, KC_F, KC_G, KC_MINS, KC_EQL, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_GRV, KC_MUTE, RGB_TOG, KC_DEL,KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT ,
+ KC_LCTL, KC_LALT, KC_LGUI, KC_APP, MO(1), KC_SPC, KC_ENT, KC_ENT, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT
+ ),
+
+ [1] = LAYOUT(
+ _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11,
+ KC_PSLS, KC_P7, KC_P8, KC_P9, KC_NLCK, _______, _______, _______, _______, KC_PSLS, KC_P7, KC_P8, KC_P9, KC_F12,
+ KC_CAPS, KC_P4, KC_P5, KC_P6, KC_NLCK, _______, _______, _______, _______, _______, KC_P4, KC_P5, KC_P6, KC_NLCK,
+ _______, KC_P1, KC_P2, KC_P3, _______, _______, _______, _______, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, _______,
+ _______, KC_P0, KC_PDOT, KC_PENT, _______, _______, _______, _______, _______, _______, KC_P0, KC_PDOT, KC_PENT, _______
+ ),
+
+ [2] = LAYOUT(
+ _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11,
+ KC_PSLS, KC_P7, KC_P8, KC_P9, KC_NLCK, _______, _______, _______, _______, KC_PSLS, KC_P7, KC_P8, KC_P9, KC_F12,
+ KC_CAPS, KC_P4, KC_P5, KC_P6, KC_NLCK, _______, _______, _______, _______, _______, KC_P4, KC_P5, KC_P6, KC_NLCK,
+ _______, KC_P1, KC_P2, KC_P3, _______, _______, _______, _______, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, _______,
+ _______, KC_P0, KC_PDOT, KC_PENT, _______, _______, _______, _______, _______, _______, KC_P0, KC_PDOT, KC_PENT, _______
+ ),
+
+ [3] = LAYOUT(
+ _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, EEP_RST, _______, _______, _______, KC_F12,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_MOD, RGB_SPI, RGB_HUI, RGB_SAI, RGB_VAI,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_RMOD, RGB_SPD, RGB_HUD, RGB_SAD, RGB_VAD
+ )
+
+};
diff --git a/keyboards/aleblazer/zodiark/keymaps/via/oled.c b/keyboards/aleblazer/zodiark/keymaps/via/oled.c
new file mode 100644
index 0000000000..037fe2ff71
--- /dev/null
+++ b/keyboards/aleblazer/zodiark/keymaps/via/oled.c
@@ -0,0 +1,78 @@
+/*
+Copyright 2021 Spencer Deven <splitlogicdesign@gmail.com>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifdef OLED_DRIVER_ENABLE
+
+static void render_logo(void) {
+ static const char PROGMEM qmk_logo[] = {
+ 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
+ 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
+ 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0
+ };
+
+ oled_write_P(qmk_logo, false);
+}
+
+static void print_status_narrow(void) {
+ // Print current mode
+ oled_write_P(PSTR("\n\n"), false);
+
+ switch (get_highest_layer(layer_state)) {
+ case 0:
+ oled_write_ln_P(PSTR("Qwrt"), false);
+ break;
+ default:
+ oled_write_P(PSTR("Mod\n"), false);
+ break;
+ }
+ oled_write_P(PSTR("\n\n"), false);
+ // Print current layer
+ oled_write_ln_P(PSTR("LAYER"), false);
+ switch (get_highest_layer(layer_state)) {
+ case 0:
+ oled_write_P(PSTR("Base\n"), false);
+ break;
+ case 1:
+ oled_write_P(PSTR("Raise"), false);
+ break;
+ case 2:
+ oled_write_P(PSTR("Lower"), false);
+ break;
+ case 3:
+ oled_write_P(PSTR("Adjust"), false);
+ break;
+ default:
+ oled_write_ln_P(PSTR("Undef"), false);
+ }
+ oled_write_P(PSTR("\n\n"), false);
+ led_t led_usb_state = host_keyboard_led_state();
+ oled_write_ln_P(PSTR("CPSLK"), led_usb_state.caps_lock);
+}
+
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+ if (is_keyboard_master()) {
+ return OLED_ROTATION_90;
+ }
+ return rotation;
+}
+
+void oled_task_user(void) {
+ if (is_keyboard_master()) {
+ print_status_narrow();
+ } else {
+ render_logo();
+ }
+}
+
+#endif
diff --git a/keyboards/aleblazer/zodiark/keymaps/via/rules.mk b/keyboards/aleblazer/zodiark/keymaps/via/rules.mk
new file mode 100644
index 0000000000..76d3c49ffd
--- /dev/null
+++ b/keyboards/aleblazer/zodiark/keymaps/via/rules.mk
@@ -0,0 +1,2 @@
+RGBLIGHT_ENABLE = yes
+VIA_ENABLE = yes
diff --git a/keyboards/aleblazer/zodiark/readme.md b/keyboards/aleblazer/zodiark/readme.md
new file mode 100644
index 0000000000..fe28bedd48
--- /dev/null
+++ b/keyboards/aleblazer/zodiark/readme.md
@@ -0,0 +1,23 @@
+# Zodiark Keyboard
+
+
+
+A split keyboard with 5x7 including a thumbcluster, encoders on each side, per key RGB, and 2x I2C headers per side, supporiting 1.3"/.96" 128x64 OLEDs (the 1.3" is an SSH1106 OLED, refer to QMK documentation for limitations), .91" 128x32 OLEDs.
+
+* Keyboard Maintainer: [Aleblazer](https://github.com/Aleblazer/), [Discord Link](https://discord.gg/BCSbXwskVt)
+* Hardware Supported: Pro Micro and derivatives
+* Hardware Availability: Pending Group Buy - [Discord Link](https://discord.gg/BCSbXwskVt)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make zodiark:default
+
+Flashing example for this keyboard:
+
+ make zodiark:default:flash
+
+Remove TRRS cable from halves, plug into one side, press reset button when asked. Repeat process on the other side.
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+Credit to Sofle and Josef Adamcik <josef.adamcik@gmail.com> for OLED and layer code.
diff --git a/keyboards/aleblazer/zodiark/rules.mk b/keyboards/aleblazer/zodiark/rules.mk
new file mode 100644
index 0000000000..89e4850d83
--- /dev/null
+++ b/keyboards/aleblazer/zodiark/rules.mk
@@ -0,0 +1,27 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = no # Console for debug
+COMMAND_ENABLE = no # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no # Enable Bluetooth
+AUDIO_ENABLE = no # Audio output
+OLED_DRIVER_ENABLE = yes # Enable Support for SSD1306 or SH1106 OLED Displays; Communicating over I2C
+ENCODER_ENABLE = yes
+SPLIT_KEYBOARD = yes
+LTO_ENABLE = yes
+RGB_MATRIX_DRIVER = WS2812
diff --git a/keyboards/aleblazer/zodiark/zodiark.c b/keyboards/aleblazer/zodiark/zodiark.c
new file mode 100644
index 0000000000..d3893ada03
--- /dev/null
+++ b/keyboards/aleblazer/zodiark/zodiark.c
@@ -0,0 +1,54 @@
+/*
+Copyright 2021 Spencer Deven <splitlogicdesign@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "zodiark.h"
+
+#ifdef RGB_MATRIX_ENABLE
+led_config_t g_led_config = { {
+// Key Matrix to LED Index
+ // Left Hand
+ { 5, 4, 3, 2, 1, 0, 12 },
+ { 6, 7, 8, 9, 10, 11, 13 },
+ { 19, 18, 17, 16, 15, 14, 26 },
+ { 20, 21, 22, 23, 24, 25, NO_LED },
+ { 33, 32, 31, 30, 29, 28, 27},
+ // Right Hand
+ { 39, 38, 37, 36, 35, 34, 46 },
+ { 40, 41, 42, 43, 44, 45, 47 },
+ { 53, 52, 51, 50, 49, 48, 60 },
+ { 54, 55, 56, 57, 58, 59, NO_LED },
+ { 67, 66, 65, 64, 63, 62, 61 },
+
+
+}, {
+ // LED Index to Physical Position
+ // Left Hand
+ { 93, 0 }, { 74, 0 }, { 56, 0 }, { 37, 0 }, { 19, 0 }, { 0, 0 }, { 0, 16 },
+ { 19, 16 }, { 37, 16 }, { 56, 16 }, { 74, 16 }, { 93, 16 }, { 112, 24 }, { 112, 40 },
+ { 93, 32 }, { 74, 32 }, { 56, 32 }, { 37, 32 }, { 19, 32 }, { 0, 32 }, { 0, 48 },
+ { 19, 48 }, { 37, 48 }, { 56, 48 }, { 74, 48 }, { 93, 48 }, { 112, 52 },
+ { 112, 64 }, { 93, 64 }, { 74, 64 }, { 56, 64 }, { 37, 64 }, { 19, 64 }, { 0, 64 },
+ // Right Hand
+ { 132, 0 }, { 150, 0 }, { 169, 0 }, { 187, 0 }, { 206, 0 }, { 224, 0 }, { 224, 16 },
+ { 206, 16 }, { 187, 16 }, { 169, 16 }, { 150, 16 }, { 132, 16 }, { 113, 24 }, { 113, 40 },
+ { 132, 32 }, { 150, 32 }, { 169, 32 }, { 187, 32 }, { 206, 32 }, { 224, 32 }, { 224, 48 },
+ { 206, 48 }, { 187, 48 }, { 169, 48 }, { 150, 48 }, { 132, 48 }, { 113, 52 },
+ { 113, 64 }, { 132, 64 }, { 150, 64 }, { 169, 64 }, { 187, 64 }, { 206, 64 }, { 224, 64 },
+}, {
+ // LED Index to Flag
+ 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4
+} };
+#endif
diff --git a/keyboards/aleblazer/zodiark/zodiark.h b/keyboards/aleblazer/zodiark/zodiark.h
new file mode 100644
index 0000000000..5c25cea547
--- /dev/null
+++ b/keyboards/aleblazer/zodiark/zodiark.h
@@ -0,0 +1,38 @@
+/*
+Copyright 2021 Spencer Deven <splitlogicdesign@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#pragma once
+#include "quantum.h"
+
+#define LAYOUT( \
+ L00, L01, L02, L03, L04, L05, R01, R02, R03, R04, R05, R06, \
+ L10, L11, L12, L13, L14, L15, L06, R00, R11, R12, R13, R14, R15, R16, \
+ L20, L21, L22, L23, L24, L25, L16, R10, R21, R22, R23, R24, R25, R26, \
+ L30, L31, L32, L33, L34, L35, L26, L36, R30, R20, R31, R32, R33, R34, R35, R36, \
+ L40, L41, L42, L43, L44, L45, L46, R40, R41, R42, R43, R44, R45, R46 \
+ ) \
+ { \
+ { L00, L01, L02, L03, L04, L05, L06 }, \
+ { L10, L11, L12, L13, L14, L15, L16 }, \
+ { L20, L21, L22, L23, L24, L25, L26 }, \
+ { L30, L31, L32, L33, L34, L35, L36 }, \
+ { L40, L41, L42, L43, L44, L45, L46 }, \
+ { R06, R05, R04, R03, R02, R01, R00 }, \
+ { R16, R15, R14, R13, R12, R11, R10 }, \
+ { R26, R25, R24, R23, R22, R21, R20 }, \
+ { R36, R35, R34, R33, R32, R31, R30 }, \
+ { R46, R45, R44, R43, R42, R41, R40 } \
+}