History

honorless 7b8545b635 fix: detect CONVERT_TO vs MCU in rules.mk MCU no longer changes to match the converter, resulting in features being disabled unnecessarily on ARM Micros. Check for a non-blank CONVERT_TO instead.		2024-02-28 19:38:42 -05:00
..
keymaps	fix: detect CONVERT_TO vs MCU in rules.mk	2024-02-28 19:38:42 -05:00
info.json	Even more `info.json` whitespace cleanups (#20703 )	2023-05-04 19:09:59 +10:00
readme.md
rules.mk

readme.md

Ishi 80 Mk 0

Ishi 80 is a 60% keyboard with a SouthPaw, Mirrored Numpad.

Note: This firmware is for ATMega32U4 based daughterboards with the standard Pro-Micro footprint. It does not support the Encoder and OLED display functionality.

Keyboard Maintainer: Jason Devadoss
Hardware Supported: Ishi80 Mk 0 with standard Pro Micro footprint daughterboards
Hardware Availability: -

Make example for this keyboard (after setting up your build environment):

make argo_works/ishi/80/mk0_avr:default

Flashing example for this keyboard:

make argo_works/ishi/80/mk0_avr:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
Keycode in layout: Press the key mapped to QK_BOOT if it is available